Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

It’s a little cloth patch that you can patch stuff with, or sew on a hat, if you are so inclined. For bed or for the ride, it’s the perfect accessory for the fashion conscious. - Customize Surly gear and clothing with Surly patches - Several different sizes and styles available - Dimensions: 3x3.5

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

The adapter puck is required for mounting Wahoo head units to the Pro Blendr Alloy Computer Mount. - Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Wahoo Adapter Puck for secure mounting of your Wahoo head unit. Blendr is an elegant, integrated accessory mounting solution - For use with Wahoo head units and Pro Blendr Alloy Computer Mount - Removable design alloys quick and easy adapter puck replacement

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Fear no bike commute with OnGuard's saddle and accessory tether. A sturdy steel cable with permanently fastened loops at either end provides a high degree of security for your bike. 5mm thick, flexible steel cable is tough as nails, and a vinyl coating protects your bike's paint from scratches.

• Park Tool Storage Hooks are perfect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Wood threaded • Made from 7mm steel rod • For a pilot hole in wood, use a 1/4" or 6mm bit • Sold in pairs

Prestadapter is a lightweight Presta-to-Schrader adapter with one more great feature. The hole on the opposite side is a Presta valve core remover! Super-light Anodized Aluminum. - Schrader to Presta valve adapter - Presta valve core tool - Forged alloy single piece precision machined body - Only 1.3 grams actual weight each - Two (2) adapters included

Keep your water bottle within easy reach with Bontrager's Handlebar Bottle Cage Mount, which clamps to standard cruiser and flat handlebars and allows you to add a bottle cage to the front of your bike. • Handlebar-mounted cages get the water bottle up close and personal • Clamp only (cage sold separately) • Fits both 22.2mm and 25.4mm bars • Aluminum

Genuine replacement parts for your Interchange bag system. - The perfect accessory for when you have multiple bikes or just need a replacement. - Interchange bracket for Quick Cleat - Rugged and lightweight plastic construction - Easy on, easy off storage

- 250mm seat stays for the Classic Disc Rack (PN 730387-01) - Sold as a pair

- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges

Muc-Off hand sanitizer is great to have around the shop for everyone to use. - Contains 80% alcohol - Bottled in an FDA Facility - World Health Organization recommended formula - Vegetarian Friendly - This is a water thin formula, not gel

Helmet, Visor & Goggle Cleaner quickly and safely removes dirt, dust, grime, snow, sweat, and oily residue from all helmets, eyewear, and goggles. Its been formulated using de-ionized water as recommended by many helmet manufacturers and it’s safe to use on all lens materials including polycarbonate! Visor, Lens & Goggle Cleaner is also anti-bacterial and uses pH-neutral soaps. And you don’t have to worry about the formula either! It’s fully biodegradable and contains no solvents or harmful chemicals. It's perfect for cleaning motorcycle goggles, cycling glasses, and goggles as well as snowboard and ski goggles. - Formulated using de-ionized water - pH neutral formula as recommended by helmet manufacturers - Free from solvents and harmful chemicals - 100% Biodegradable

Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.

- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Ortlieb O-Strap Adjustable Rubber Strap - 190mm - Black - Soft material keeps items secure and helps prevent scratching

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

For all models with the QL1 or QL2 system. Missing or defective screws or nuts? Get this screw-and-nut set to conveniently replace any defective or missing screws. - 12 screws - 12 plastic nuts

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Created primarily for hydration, GU Hydration Drink Tabs offer the athlete a low-calorie drink option. GU Hydration Drink Tabs are reformulated with xylitol to help reduce gastrointestinal distress when compared to sorbitol. Sodium, the primary electrolyte lost in sweat, helps maintain water balance. Use GU Hydration Drink Tabs before, during, and after exercise to hydrate and replenish electrolyte levels.

Cadence Magnet for all CatEye computers that record cadence.

• Oversized hook for large MTB tires and tall aero rims • Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend • Made from 9.5mm wire • Wood screw thread is nominally 11.4mm outside diameter (15/32") with 7 threads per inch • Use a minimum of 11/32" drill size to pilot wood hole • Blue vinyl coated

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!

Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.

- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal

- .5L SKS water bottle - Made in Netherlands

Cannondale Headshok Adaptor for the SKS Shockboard Fender

- Spacers for Explorer Exp Barbag

Stolen BMX branded stickers for your shop or for customers. - Perfect to slap onto a bike frame, notebook, helmet, or anywhere you wish

Seeley BMX Peg

Seeley BMX Peg

Jumpstart your day with Nuun Energy, a crafted blend designed to deliver a lift that lasts. 8 tubes per pack. That's 80 servings total! - 20 mg Panax Ginseng, an Ancient Herbal Remedy - 80 mg of Caffeine Derived From Organic Green Tea - A Blend of Vitamins B12 & B6 Need a Boost? Energizing ingredients for any adventure. One up your water™ with our high-voltage blend of organic green tea, ginseng, B vitamins, and electrolytes for a quick energy boost. It’s the perfect sidekick for workouts, workdays, and everything in between. How To Enjoy: - DROP: Add one tablet to 16 oz of water - DISSOLVE: Wait a few minutes for tablet to dissolve - DRINK: Sip, savor, and enjoy!

Under the weather or on-the-go? Grab some Nuun Immunity! When your body is stressed with travel or fighting an illness, hydration and botanicals are crucial for maintaining immune health. Nuun Immunity is a potent blend of electrolytes, anti-inflammatories, and antioxidants that provides total immune system support. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Need a healthy hydration boost? Enjoy Nuun Vitamins! For everyday health and hydration essentials, Nuun Vitamins provides a boost in the 11 different vitamins most under-consumed in the average diet. Nuun Vitamins is a tasty and healthful way to top-up on the minerals that your body needs for everyday energy and vitality. - 12 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

The Lizard Skins Patch Kits are made with high performance adhesive and will protect your frame from nicks and scratches. All patch kits come with 2 large, 4 medium and 2 small patches. - 14 mils thick for premium durability - UV resistant – won’t fade or discolor

The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle

Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors

Storage made simple Pack the essentials for every ride with the Bontrager Storage Bottle. It features secure storage for multi-tool, tubes, tire lever, CO2, and patch kit that easily fits in any standard water bottle cage. Key features - Wide opening for easy access - Fits in standard water bottle cages - Securely holds tools, CO2, spare tube, tire levers and more

Clear stick on chainstay and frame protectors.

JET is a biodegradable bottle made in food-grade squeezable polyethylene. The bottle has a sporty, sophisticated, and practical design that made it possible for us to achieve greater resistance for the bottle body while retaining unaltered its lightness and softness. Distinguished by an elegant and sinuous profile, the JET comes with a contoured bottle body with a smaller diameter for easier and improved handling, insertion, and removal of the water bottle under any circumstance. The standard 74mm diameter of the JET ensures it can be used with all the commercially available cages.

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws